home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Professional Soft Collection 1.02
/
Professional Soft Collection 1.02.iso
/
archivat
/
shez
/
shez.hlp
< prev
next >
Wrap
Text File
|
1996-01-26
|
28KB
|
837 lines
*# !Display serial number
Use this option to display your
installed serial number.
*file !!!MAIN FILE WINDOW OPTIONS!!!
--------MISC COMMANDS--------------
ESC.......= Go back 1 directory or
exit if at the root.
F1........= HELP
ALT-Q.....= Immediately exit SHEZ
CTL-X.....= Exit SHEZ into extract dir.
CTL-ENTER.= Activate Alternate File Viewer
F6........= Toggle between $.$ and *.*
F7........= Create new compressed file
ALT-B.....= Browse any file
ALT-C.....= Add/update compressed file comments
ALT-P.....= Enter drive:path to extract into
ALT-W.....= Write SHEZ.CFG file.
ALT-1.....= Toggle authenticity mode (PKZIP)
ALT-4.....= Toggle Volume label processing
/.........= Display menu bar
#.........= Display Serial Number
Enter.....= Display directory contents, or
Display file contents.
F10.......= Temporary Exit to DOS
ALT-F10...= Temporary Exit to DOS into
extract Directory
F2........= Switch to another directory
TAB.......= Open\Close second directory
window
ALT-O.....= fOrmat a Floppy
----HIGHLIGHTED FILE COMMANDS------
CTL-F2....= Copy highlighted file
F3........= View highlighted file
CTL-F3....= Move highlighted file
F4........= Del highlighted file/dir
Del.......= Del highlighted/tagged
file(s) or dirs.
F5........= Show highlighted file stats
CTL-F6....= Ren highlighted file
F8........= Make Self Extracting file
from highlighted file
ALT-V.....= Convert highlighted archive
file to another format.
+.........= Tag highlighted file
-.........= Untag highlighed file
ALT-F.....= Run PKZIPFIX against file
----TAGGED FILE COMMANDS-----------
SFT-F2....= Copy tagged files
SFT-F3....= Move tagged files
SFT-F4....= Delete all tagged files
SFT-F6....= Rename tagged files
SFT-F8....= Make Self Extracting files
from all tagged files.
CTL-V.....= Convert all tagged archive
files to another format.
CTL-U.....= Untag all tagged files
ALT-Z.....= Check .COM, .EXE, .OVL files in
all tagged compressed files for
viruses.
CTL-Z.....= Same as ALT-Z but strip comments
out of .ZIP files.
CTL-SPACE.= Tag all files
CTL-T.....= Tag all files
-----FILE LIST COMMANDS------------
F9........= Sort the file display
ALT-R.....= Reread the directory.
SPACE.....= Toggle tag status
ALT-D.....= View 4DOS/NDOS desc.
TAB.......= Open/Close second file
window.
-----MACRO COMMANDS----------------
ALT-5.....= Pause macro for input
ALT-6.....= Start/Stop recording
ALT-7.....= Playback recorded keys
ALT-8.....= Load macro file
ALT-9.....= savE macro file
ALT-0.....= Flush key record buffer
*main !!!MAIN HELP PANEL!!!
-KEYS ACTIVE DURING compressed FILE DISPLAY-
ESC = Cancel operation
ALT-A = Add a list of files
A = Add file(s) to compressed
ALT-C = Add/update file comments
S = Add\Update file comment records
for highlighted file
SFT-S = Add\Update file comment records
for all files in compressed file.
ALT-Z = Check .COM,.EXE,.OVL for viruses
CTL-V = Convert sfx file.
CTL-Y = Copy tagged files from one compress
file to another.
F7 = Create new compressed file
ALT-D = Delete all extracted files
D = Delete highlighted file
Del = Delete highlighted/tagged files(s)
CTL-D = Delete tagged files
# = Display Serial Number
F8 = EDIT SELECTED FILE
ALT-P = Enter drive:path to extract into
CTL-X = Exit SHEZ into extract dir.
ALT-X = Extract all files
CTL-E = Extract all tagged files
ALT-N = Extract all/tagged NEWER files
ALT-E = Extract specified file(s)
E = Extract the highlighted file
ALT-O = fOrmat a Floppy
ALT-F = Freshen a list of files
F = Freshen file(s) in compressed
F1 = HELP
ALT-Q = Immediately exit SHEZ
/ = Menu display
ALT-M = Move a list of files
M = Move file(s) to compressed file
TAB = Open\Close second directory
window
G = Password for compressed file
R = Run the highlighted file
ALT-G = Search files for a STRING
Z = SPECIFY compressed FILE MASK
I = Show info about archive file
F9 = Sort archive listing
P = Specify Path options
ALT-S = Speed search
F2 = Switch to another archive file
or directory
+ = Tag highlighted file
F10 = Temporary exit to DOS
ALT-F10 Temporary exit to DOS
into extract DIR
T = Test archive integrity
ALT-1 = Toggle authenticity mode (PKZIP)
O = Toggle overwrite for extract
SPACE = Toggle tag status
ALT-T = Toggle tagged file display line
ALT-4 = Toggle volume label processing
CTL-U = Untag all files
- = Untag highlighed file
ALT-U = Update a list of files
CLT-T = Update archive file time&date
U = Update file in archive
ALT-V = View file comment records
ALT-Y = Run PGM against tagged file(s)
V|RET = View the file
CTL-ENTER = Ativate Alternate File Viewer
CTL-SPACE = Tag all files
ALT-5 Pause macro for input.
ALT-6 Start/Stop recording.
ALT-7 Immediately play recorded keys.
ALT-8 Load and run a recorded key macro.
ALT-9 Save recorded keys
ALT-0 Turn off Recording and flush record buffer.
*pmenu1 !!Directory pull down!!
Use the left and right cursor keys to
highlite a menu item. Then press the
enter key to display the options for
the highlighted item. After the
option menu appears you may press the
F1 (help) key to obtain further help.
*pmenu2 !!Directory pull down!!
Use the left and right cursor keys to
highlite a menu item. Then press the
enter key to display the options for
the highlighted item. After the
option menu appears you may press the
F1 (help) key to obtain further help.
*space !!toggle tag status!!
Pressing the space bar will tag the
highlighted file if it is not tagged,
or will untag the file if is it tagged.
*+ !!tag file!!
The plus key will tag the currently
highlighted file and will move the
highlight bar down one line.
*- !!untag file!!
The minus key to untag the currently
highlighted file and will move the
highlight bar down one line.
*a !!add!!
Using this option you can specify the
file(s) you wish to ADD to the
compressed file. You may enter multiple
filespecs in the entry window. Wild
cards are allowed for filenames and
extensions.
*alta !!add-from-list!!
This option allows you to ADD files into
the compressed by displaying a list of
files in a window. After the window is
displayed you tag the files to ADD by
pressing the space bar. After all files
have been tagged press the ENTER key to
process the tagged files.
*altc !!add/update comments!!
This option will allow you to add or
update the compressed file comments.
*altd !!delete all extracted!!
This option will delete all files that
are contained in the compressed file
from the current DISK:\DIRECTORY,or the
one specified via the ALT-P command.
*alte !!extract list!!
This option allow you to specify which
files to extract from the compressed
file. You may specify more the one
filespec when the prompt appears. Wild
cards are allowed.
*altf !!freshen-from-list!!
This option allows you to FRESHEN files
in the compressed by displaying a list
of files in a window. After the window
is displayed you tag the files to
FRESHEN by pressing the space bar.
After all files have been tagged press
the ENTER key to process the tagged
files.
*altg !!search for string!!
This option allows you to search all ,or
only tagged files, for a specific string of
characters using the program FGREP.COM
(Which must be in a directory in your PATH
statement). If no files are tagged then all
files will be searched. After the search is
completed to results will be listed on the
screen.
*altm !!move-from-list!!
This option allows you to MOVE files
into the compressed by displaying a list
of files in a window. After the window
is displayed you tag the files to MOVE
by pressing the space bar. After all
files have been tagged press the ENTER
key to process the tagged files.
*altn !!extract newer!!
This option will extract ALL or TAGGED NEWER
files from the compressed file into the
current DISK:\DIRECTORY or the one specified
via the ALT-P command.
*altp !!!get_extract_path!!!
This options allows you to specify a disk
and directory of where any extracted files
will be placed. Specify the extract path as
follows:
DISK:\DIRECTORY
Pressing any key other than the ENTER key
will clear the extract path. To display a
directory window enter ONLY a DRIVE LETTER
FOLLOWED BY A COLON, then press the enter
key.
A single * may be entered to tell SHEZ to
use it's floating extract location
logic.
*alts !!speed_srch!!
Speed search allows you to find a file
in the compressed file quickly. After
the window pops up enter the first
character of the file you wish to find.
The display will be repositioned to the
first file in the list that starts with
that letter. (NOTE since files are
stored in random order sort the list
first)
*altt !!toggle tagged display line!!
Pressing the ALT-T keys will toggle
the tagged file display line at the
bottom of the screen.
*altu !!update-from-list!!
This option allows you to UPDATE files
in the compressed by displaying a list
of files in a window. After the window
is displayed you tag the files to
UPDATE by pressing the space bar.
After all files have been tagged press
the ENTER key to process the tagged
files.
*altv !!view archive comments!!
This option will display the master
comment record and the file comment
records for the selected compressed
file.
*altx !!extract all!!
This option will extract ALL files from
the compressed file into the current
DISK:\DIRECTORY or the one specified via
the ALT-P command.
*alty !!run pgm on tagged!!
This option allows run a program against
all tagged file(s). You will be prompted
to enter the program name to run, the
parameters to pass to the program, if you
want SHEZ to swap itself out of memory when
running the program, and if you want SHEZ
to pause after each execution of your
program.
*altz !!virus check!!
This option will check files to see if they
have been infected with a virus. You must
have the virus checking program from McAfee
Assoc. call SCAN.EXE version 39 or greater,
and have used the configuration program to
tell SHEZ where to find SCAN.EXE.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
IF FILES ARE TAGGED SHEZ WILL ONLY CHECK
THE TAGGED FILES FOR INFECTION.
*alt1 !!authenticity toggle!!
This option will toggle the authenticity
option when using PKZIP version 1.1 or
greater. If the authenticity mode is
toggled on a ! will appear next to the
[FILE LIST] window header on the main
screen or next to the NAME field on the
compressed file contents screen.
*c !!create-new!!
This will allow you to create a NEW
compressed file. You will be prompted
to enter the
DISK:\DIRECTORY\FILENAME.EXT of the
compressed file to create, whether you
want to add or move files into the new
compressed file, and the DISK:\DIRECTORY
of the files to add and/or move to the
new compressed file.
YOU MUST SUPPLY A FILE EXTENSION FOR THE
FILE TO BE CREATED. SHEZ CURRENTLY WILL
ALLOW YOU TO CREATE ZIP,ARC,ZOO,LZH and
PAK files!!!!!
You will also be asked if you want to
TAG files to be added/moved or process
the entered file spec as is.
If the compression program you choose
supports saving path information you will
also be asked if you want to save
directory information, and if you want to
recurse the directory tree.
If you are converting from a ZIP to an ARJ
or a ARJ to a ZIP file you will also be
asked if you wish to preserve volume label
information that can be stored inside the
compressed file. (THIS OPTION WILL ONLY
APPEAR WHEN CONVERTING THE CURRENTLY
HIGHLIGHTED FILE. IT WILL NOT APPEAR IF
RUNNING UNDER OS/2.)
*ctld !!delete tagged!!
This option will delete all tagged files
from the compressed file. You will be
asked to verify the delete before the
files are actually deleted from the
compressed file.
*ctle !!extract tagged!!
This option will extract all tagged
files from the compressed file.
*ctlenter !!alternate viewer!!
This option will activate the alternate
file viewer if one has been set via the
SHEZEV environment variable. PLEASE SEE
THE USER MANUAL FOR INSTRUCTIONS ON
SETTING UP AN ALTERNATE VIEWER.
*ctlt !!update compressed time and date!!
This option will set the compressed
file's time and date to the time and
date corresponding to the newest file in
the compressed file.
*ctlu !!untag all!!
This option will untag all currently
tagged files.
*ctlsp !!tag all files!!
This option will tag all files in the
currently displayed window.
*ctlv !!convert sfx files!!
This option will convert a self
extracting file back to its native
compressed file format. The self
extracting file will remain untouched.
The normal compressed file will be
built on the same drive and directory
where self extracting file is found.
*ctly !!copy members to another arc!!
This option allows you to copy all
tagged files from the current compressed
file into another compressed file. The
target compressed file may be any
currently supported format.
*ctlx !!exit to extract dir!!
This option will exit SHEZ and will
drop you off into disk and directory
that is specified as the extract
location.
*d !!delete one file!!
This option will delete the currently
highlighted file from the compressed
file. You will be asked to verify the
delete before the delete is actually
done.
*e !!extract one file!!
This option will extract the currently
highlighted file onto the default disk
drive and directory, or the
DISK:\DIRECTORY that was specified via
the ALT-P command.
*f !!freshen!!
Using this option you can specify the
file(s) you wish to FRESHEN in the
compressed file. You may enter multiple
filespecs in the entry window. Wild
cards are allowed for filenames and file
extensions.
*f10 !!to-dos!!
This option will temporarily exit to
DOS. You may then execute any DOS
command. To return to SHEZ
enter EXIT at the DOS prompt and press
the return key.
*af10 !!to-dos to extract_path!!
This option will temporarily exit to
DOS and will drop you into the extract
directory. You may then execute any DOS
command. To return to SHEZ enter EXIT
at the DOS prompt and press the return key.
*f2 !!switch_arc!!!
This option prompts for a new DRIVE:\PATH to
change to. You may also specify a filename
and file extension if you wish. Wild cards
in the name and extension are allowed. IF
YOU ENTER A FILENAME OF $ AND A FILE
EXTENSION OF $ SHEZ WILL DISPLAY ONLY THE
ARCHIVE FILES THAT ARE FOUND IN THE
SPECIFIED DIRECTORY.
I.E. C:\WORK\$.$
You can also pop-up a directory tree window
by press the F9 key. When the tree appears
you may press the letters C-Z to obtain a
directory tree of a different drive. You may
also enter a DRIVE LETTER FOLLOWED BY A
COLON, before pressing the the F9 key.
*f8 !!edit!!
This option will allow you to edit a
file in the compressed file. This
option will only work if you specified
an editor to use when you configured
compressedPER.
*f9 !!!get_sort!!!
Using this option you can specify how
you want the compressed files sorted on
the screen. They can be sorted by Name,
Extension, Date, Size, or Unsorted.
*fact !!!compression factor!!!
This option will allow you to set the
compression method used by the PKZIP or ARJ
programs. When you set the compression
method, it will remain in effect until you
change it again.
*g !!password!!
This option allows you to specify the password
to be used by the compression program. If the
compression program does not support passwords
an error window will appear informing you that
the option is not supported.
*i !!show info!!
This option will show information about
the compressed file. I.E. Number of
files in file, total size of all files,
time and date of compressed file, etc.
*m !!mode!!
Using this option you can specify the
file(s) you wish to MOVE into to the
compressed file. You may enter multiple
filespecs in the entry window. Wild
cards are allowed for filenames and
extensions.
*o !!toggle overwrite!!
This option toggles overwrite mode. When
overwrite mode is active the letter "O"
will appear in the upper right corner of
the compressed display heading line.
When overwrite is active the uncompress
pgm will not ask you if you wish to
overwrite a pre-existing file when you
extract a file from the compressed file.
*p !!path options!!
This option allows you to specify if you
want to save and/or use path information
when working with compressed files.
*q !!immediate exit!!
This option will immediately exit
SHEZ.
*r !!run a file!!
This option will extract and run the
highlighted EXE or COM file. You will be
prompted to enter the optional command line
parameters that the program may need. When
the program ends the extracted file will be
deleted.
*s !!add/update file comments!!
This option allows you to add and or
update the comment records associated
with the currently highlighted file.
*sfts !!add/update file comments!!
This option allows you to add and or
update the comment records assocaited
with each file in the compressed file.
*t !!test compressed!!
This option will test the integrity of
the compressed file.
*u !!update!!
Using this option you can specify the
file(s) you wish to UPDATE in the
compressed file. You may enter multiple
filespecs in the entry window. Wild
cards are allowed for filenames and file
extensions.
*v !!view!!
This option will allow you to view the
contents of a file in the compressed
file. The LIST.COM program will be used
to view the file.
*z !!mask!!
This option allows you to specify a file
mask to be used when displaying the
contents of a compressed file. For
example if you specify a mask of *.C
only the files having an extension of C
will be displayed on the screen.
*maltd !!view 4dos!!
This option will display the 4DOS or
NDOS file descriptions that are
maintained by the DESCRIBE command.
SHEZ can only handle a description
file that is 30,000 bytes or less.
*mtab !!open second file window!!
When the DOS directory window is
displayed, pressing the TAB key will
open a secondary directory display
window. You may view other directories
and/or drives while this window is
open. Pressing the TAB key again is
the only way to close the secondary
display window.
*malte !!edit highlighted file!!
This option will invoke the editor that
you specified when you configured SHEZ.
The highlighted file will be passed to
the editor.
*mcf4 !!delete tagged files!!
This option will delete all files that
have been tagged in the file window.
After all the files are deleted the file
window will be refreshed.
*mf3 !!view file!!
This option allows you to view the
highlighted file.
*mf4 !!delete file/dir!!
This option allows you to delete the
highlighted file/dir. You will be
prompted to verify the delete.
*mf5 !!file stats!!
This option will display the highlighted
file's time,date,and size.
*mf6 !!toggle $.$ *.*!!
This option will toggle the DOS files to
display between the $.$ specification
and the *.* specification.
*mf9 !!file sort!!
This option will sort the file list by
File name, File extension, or File date,
File size, or unsorted, depending on how
you reply to the sort prompt. Enter a N,
E, D, S or U.
*mf8 !!make sfx files!!
F8 will make a self extracting file from
the highlighted file.
SHIFT-F8 will make self extracting files
from all tagged files.
(ONLY ZIP,LZH,PAK, and SDN files are
currently supported)
*altb !!browse a file!!
This option allows you to enter the name
of a file you wish to view. The
user specified Browse program, that was
set during configuration, will be
use to Browse the specified file.
*malt-c !!add/update file comments!!
This option allows you to add and or update
file comment records in all tagged
compressed files. You will be prompted for a
data file that contains the comment
record(s) you wish to add.
*maltf !!run pkzipfix!!
This option will run the PKZIPFIX program
against the currently highlighted file.
The PKFIXED.ZIP file will be placed in the
same directory as the ZIP file you are
fixing. The PKZIPFIX.EXE program must be
located in a directory in your DOS path.
*malt-v !!convert one file!!
This option will convert the highlighted
archive file from one format archive to
another format archive. You will be
asked if you want to delete the original
archive file after the conversion is
complete.
*mctl-v !!convert tagged!!
This option will convert all tagged
archive file(s) from one format archive
to another format archive. You will be
asked if you want to delete the original
archive file(s) after the conversion is
complete.
*malt-r !!reread directory!!
This option will reread the current
directory and refresh the displayed file
list.
*malt-w !!write cfg file!!
This option will write the current SHEZ
configuration options out to a file
named SHEZ.CFG. The file will be written
to the current disk:\directory. This file
will be used by the SHEZCFG program to set
the default SHEZ program options when you
configure SHEZ.
*malt-z !!virus check!!
This option will check ALL .COM ,.EXE, .OVL
files in all tagged compressed files,
to see if they have been infected with
a virus. You must have the virus checking
program from McAfee Assoc. call SCAN.EXE
version 39 or greater, and have used the
configuration program to tell SHEZ where
to find SCAN.EXE.
THE CTL-Z WILL DO SAME AS ABOVE PLUS IT
WILL STRIP THE COMMENT RECORDS OUT OF
THE SCANNED .ZIP FILES.
*mctl-f2 !!copy file!!
This option allows you to copy the
highlighted file. You will be prompted
to enter file destination information.
You must at least enter a filename and
extension in the TO: field.
*mctl-f3 !!move file!!
This option allows you to move the
highlighted file. You will be prompted
to enter file destination information.
The highlighted file will be copied to
the entered destination and then deleted
from the current location.
*mctl-f6 !!rename file!!
This option allows you to rename the
highlighted file. You will be prompted
to enter new filename information.
You must at least enter a filename and
extension in the TO: field.
*msfx !!copy,move,delete,rename tagged files!!
This option will copy,move,delete, or
rename all files that have been tagged in
the file window. After all the files are
operated on, the file window will be
refreshed.
*print !!help for print!!
This option will print the currently
highlighted file. If you are working
with an ARC,ZOO,LZH or PAK file output
will always go to the DOS PRN device.
*nomatch !!no matching file found!!
No matching files where found in the directory that is displayed
in the information window. Pressing ESC will exit SHEZ, pressing
F2 will allow you to create a compressed file, and pressing
F3 allows you to specify a new DISK:\DIRECTORY to look at.
*macs !!Macro help file!!
All keyboard macro functions must be initiated from
the keyboard. Hot KEYS are as follows:
ALT-5 Pause the macro to accept input.
ALT-6 Start/Stop recording.
(When recording speaker will sound as each
key is pressed)
ALT-7 Immediately play recorded keys.
ALT-8 Load and run a recorded key macro.
ALT-9 Save recorded keys
ALT-0 Turn off Recording and flush record buffer.
*scan !!set scan to all or exe!!
Using this option you may over-ride the scanning
option that was set at configuation time.
Selecting ALL will scan all files contained in
compressed files for infection.
Selection EXECUTABLES will scan all .EXE, .COM
and .OV? files for infection.
*vol !!Toggle volume label processing!!
This option will toggle the volume label
processing in SHEZ. If active a $ will
appear next to the word NAME on the file
heading line, or in the upper left corner
of the DOS directory display box.
Volume label processing is only supported
when processing ZIP and ARJ files.
*avol !!add volume label!!
This option will add a volume label to the
current .ZIP or .ARJ file. You will be
prompted for a drive letter to obtain the
volume label from.
*tab !!open\close second dir window!!
Pressing the TAB key will open or close
a secondary DOS directory file window.
Within this window most file minipulations
can be performed.
*del !!delete highlighted/tagged file(s)
Pressing the DEL KEY, will delete the
hilighted file, if no files are tagged, OR
will delete all tagged files.
*pagd !!paging for DOS, PGMS
This option allows you to dynamically
activate or deactivate the memory paging
function when: Shelling to DOS, Running a
program contained in a compressed file, or
Executing the EDIT function. Any changes
made will lost when you exit SHEZ. To make
a permenant change use the SHEZCFG program.
*pagv !!paging for External Viewer
This option allows you to dynamically
activate or deactivate the memory paging
function when executing an External Viewer
program. Any changes made will lost when
you exit SHEZ. To make a permenant change
use the SHEZCFG program.
*alto !!Format Floppy
This option allows you to format a floppy disk
from within SHEZ. Formatting the A and B drives
are supported in the following formats: 360K,
1.2K, 720K, and 1.44K.
================================================
NOTE: THE FORMATTING ROUTINE WILL ONLY FUNCTION
ON "AT" CLASS MACHINES, IT WILL NOT WORK ON "XT"
TYPE PC'S.
================================================
*end
INDEXZ # !Disp " file !!! K 2 ü main !!! K 5 pmenu1 ! ( pmenu2 ! ( , space !! * 6 + !!t &